When designing your brochures, think about how they will be displayed.  Most brochure holders accept standard A4, A5 and Trifold (DL) holders.  Odd sizes mean specially made and more expensive holders.  As your brochures are a valuable sales tool, use them to their best advantage by showing as much of the brochure as possible.  Our brochure holders give full view of brochures as well as full height support.  Statistics gathered throughout Australia have proven that approximately 35% of all brochures printed are discarded due to damage in the holders, damage during handling, or merely not being displayed at all, during the life of the brochure.

To assist in overcoming the wastage caused by inadequate support in the holder, our brochure holders give full height support virtually eliminating brochure damage through flopping!  Your brochures are your image!  Your brochures are worth protecting!

How to calculate wall display dimensions

Wall Bar Length

A4 - Each A4 holder is 225mm wide.  Multiply horizontal number of holders x 225mm.  Example: top row 4 across x 225mm = 900mm wall bar.

A5 - Each A5 holder is 156mm wide.  Multiply horizontal number of holders x 156mm.  Example: top row 4 across x 156mm = 624mm wall bar.

Trifold (DL) - Each Trifold or DL holder is 110mm wide.  Mulitply horizontal number of holders x 110mm.  Example: top row 4 across x 110mm = 440mm wall bar.

Postcards have the same rule as above: vertical 125mm wide, horizontal 180mm wide.

Depth of Wall Display

We recommend that brochure holders be displayed at maximum 4 holders deep.  The reason for this is that as each row is added, the holders come away from the wall by approximately 25mm.  After the fourth row is added, the holders are approximately 140mm from the wall.  We also recommend that if a display is 3 or more holders deep, then a VS80 Universal Base Bracket be used on each holder of the third row.  This stabilises the display.

General height calculation rules.

When you add a row of A4 holders you add 160mm to the height of the display.  When you add a row of A5 holders, you add 115mm to the height of the display.  When you add a row of Trifold (DL) holders, you add 115mm to the height of the display.  When you add a row of Postcard holders, you add 85mm to the height of the display for the horizontal holders and 130mm to the height for the vertical holders.